Turning the PR2000 on
PR2000 Installation Guide
17
The super-user main menu is shown above:
Cyclades-PR2000 (PR2000 name) Main Menu
1. Config
2. Applications
3. Logout
4. Debug
5. Info
6. Admin
Select option ==>
Command:
Return to Main Menu
All the router configuration commands are under "Config". Use this option to
change the router current configuration.
Applications such as ping, telnet, and traceroute can not be executed from web
browser interface.
Only one HTTP session (one super-user) is allowed at a time and telnet
sessions have priority over HTTP session. For example, if there is an open
HTTP session and someone telnets to the PR2000, the HTTP session will be
automatically closed.
Console sessions have the highest priority level and close any other type of
connection (telnet or HTTP).
Select Return to Main Menu and End HTTP session to close the super-user
session and get a new login prompt. For security reasons, the PR2000
automatically closes active sessions after 3 minutes of inactivity.
Debug concentrates all the debug tools, including line traces, memory and
buffer reports, and event logs.
Use Info to verify the current information or list the current router configuration.
Admin allows you to access administrative commands to set the date and time,
update the firmware, save current run configuration to flash memory, restore a
configuration from flash-memory, etc.
Enter
Escape
List
