Turning the PR2000 on
PR2000 Installation Guide
13
parameters: 9600 bps, 8 bits, no parity, 1 stop-bit, flow control: HW or
none.
2.2 Loging in
The PR2000 login screen looks like this:
__________________________________________
| Cyclades-PR2000 version V_X.X.X (MM/DD/YY) |
| Copyright (C) Cyclades Corporation, 1999 |
|_______________________________________ __|
[PR2000] login:
To login as a super-user, type super as the login name. Press <Enter>.
You get a password prompt. The PR2000 comes configured from factory with
the super-user password set to surt. For security reasons, you should change
this password as soon as possible as indicated later in this chapter.
To complete the login process, type in the super-user password: surt (you won't
see the password as you type it). Press <Enter>.
Upon a successful login, you should see the PR2000 main menu. You are
ready to start configuring the router.
Until the basic network parameters are set, the console is the only way to
access and configure the router. After some configuration, you will be able to
telnet to the router from any host in the network or use a browser to access
router, and access the exact same menus. This opens the possibility of remote
configuration and management of the router.
