Cutler-Hammer HWT-500, Инструкция по эксплуатации

Страница: 6 / 45

I.B. 35-557
6 of 45
TEST SET TRANSPORTATION
The HWT-500 test set is equipped with wheels and a retractable handle assembly to assist in the
transportation of the device.
To extend the handle, slide the red handle lock located underneath retracted handle and extend
the handle assembly outward.
End handles with spring returns are supplied on the main body of the unit. When lowering the
HWT-500 into an underground vault, make certain that the rope or sling is attached to the main
body end handle which is located on the same side as the retractable handle assembly. This
keeps the wheels on the bottom end of the unit and aids in the balance of the unit when it comes
to rest on the floor of the vault.
Likewise, when manually lifting the unit, always use the main body end handles.
DANGER
DO NOT ATTEMPT TO LOWER THE HWT-500 BY ATTACHING SLINGS OR ROPES TO
THE RETRACTABLE HANDLE ASSEMBLY. TO DO SO MAY CAUSE THE
RETRACTABLE HANDLE ASSEMBLY TO PERMANENTLY DISENGAGE RESULTING
IN DEATH, SEVERE PERSONAL INJURY AND/OR PROPERTY DAMAGE.
USE ONLY THE END HANDLE OF THE MAIN BODY OF THE UNIT LOCATED ON THE
SAME END AS THE RETRACTABLE HANDLE ASSEMBLY.
The test set cover is secured to the main body of the unit with four over-toggle suitcase
latches.
To return the handle into the case, slide the red handle lock and push the retractable
handle into the body of the case.