Custom Audio Electronics TK306, Руководство пользователя

Страница: 80 / 216

BUZZER SETUP
ERROR VOLUME Sets the buzzer volume when an error has occurred in the device:
OFF D
LOW
HIGH
PRINT COMPLETION
VOLUME
Sets the buzzer volume when printing is completed:
OFF D
LOW
HIGH
PRINT COMPLETION
BUZZER
Sets the timing for sounding the buzzer when printing is completed:
PAGE END
JOB END
D
This item is displayed when “Print completion volume” is set to “Low” or “High”.
POWER SETUP
AUTO PW OFF Set the Auto Power Off operation:
ENABLE = the device enters the Auto Power Off mode even when connected via
a LAN cable.
AUTO CONFIG = the device does not enter the Auto Power Off mode when connected
via a LAN cable. The device enters the OFF mode when connected
via USB.
DISABLE
D
= the power does not automatically turn off.
FEEDER SETUP
UNIT OF MEASURE
Speciies the unit for custom paper sizes:
INCH
MILLIMETER
D
OTHERS SETUP
RAM SETUP
RECEIVE BUF
SIZE
Sets the reception buffer size, expressed in MB, to secure for the local interface. Normally,
“Auto” is used. When memory overlow errors occur, lowering this setting may improve the
problem. The setting can also be raised to shorten the release time on the computer side:
AUTO
D
0.5 1 2
4 8 16 32
80