Custom Audio Electronics TK306, Руководство пользователя

Страница: 24 / 216

CANCELING JOB
(JAM)
The print data is being deleted because a paper jam occurred.
□
ADJUSTING TEMP.
The temperature of the fuser unit is being adjusted.
□
OPTIMIZING TEMP
The internal temperature of the device is being adjusted.
□
SLEEP MODE
The device is in the Sleep mode.
CHANGING LANGUAGE
PLEASE WAIT The language displayed on the operation panel is being changed. Wait until the
device becomes ready to print.
LANGUAGE CHANGE FAILED
ERROR NUM: [CODE] Failed to change the language displayed on the operation panel. Turn the device
off and then on again.
□
ADJUSTING COLOR
Automatic color shift correction is being performed.
□
ADJUSTING DENSITY
Automatic density correction is being performed.
PLEASE WAIT
EXECUTING MAINTENANCE The device is executing maintenance. Wait until the device becomes ready to
print.
FEEDING Paper is being fed.
□
USB MEMORY CONNECTING
USB memory is connecting to the device.
PLEASE LOAD PAPER
SENSOR CALIBRATING
The paper sensors are being adjusted.
□
TAKE LABEL
Paper is waiting to be pulled out from the device. Pull out the paper.
□
ORDER TONER
Toner is low. Prepare a new toner cartridge.
□
TONER NOT RECOMMENDED
The toner cartridge is not recommended for the device.
PRESS OK BUTTON
ERROR PDL
An error has occurred in the device. Press OK to clear the error.
□
ORDER IMAGE DRUM
The image drum is reaching the end of its lifetime. Prepare a new image drum.
□
ORDER FUSER UNIT
The fuser unit is reaching the end of its lifetime. Prepare a new fuser unit.
□
ORDER BELT UNIT
The transfer belt is reaching the end of its lifetime. Prepare a new transfer belt.
□
FUSER UNIT LIFE
The fuser unit has reached the end of its lifetime, and printing will stop soon.
Prepare a new fuser unit.
24