Custom Audio Electronics TK306, Руководство пользователя

Страница: 78 / 216

X DIMENSION Sets the default paper width for custom paper. The paper width is the length perpendicular
to the paper feed direction:
from 25 mm to 86 mm (50.0 mm D)
Y DIMENSION Sets the default paper width for custom paper. The paper length is the length in the same
direction as the paper feed direction:
from 53 mm to 551 mm (53.0 mm D)
BARCODE ADJUST Adjusts the line width of barcodes:
OFF D
ON1 = makes barcodes one dot thinner than the standard line width.
ON2 = makes barcodes two dots thinner than the standard line width.
PRESENTER MODE
Conigures paper output:
OFF = outputs paper with the regular output method.
MODE1 = retains the paper with the Presenter Unit and prints the next page when the
paper is pulled out.
MODE2 = retains the paper with the Presenter Unit and prints the next page when print
data exists.
This parameter is displayed when “Presenter unit” is set to “Enable”.
COLOR MENU
CMY100% DENSITY Selects whether to use halftones when outputting in 100% C, M or Y:
ENABLE
D
DISABLE
PCL SETUP
FONT SOURCE Sets the location of the PCL fonts:
RESIDENT
D
DOWNLOADED
DOWNLOADED is displayed when software fonts have been downloaded to RAM per-
manently.
FONT NO. Sets the PCL font number:
from I0 to I30 (I30
D
, see paragraph 13.3 )
FONT PITCH
Sets the width of the PCL default font. Set in characters per inch (ixed pitch scalable
font by default):
from 0.44 cpi to 99.99 cpi
78