Custom Audio Electronics TK306, Руководство пользователя

Страница: 74 / 216

Y ADJUST Corrects the position of the entire print image in the feed direction of the paper. Set in
increments of 0.25 mm:
from -2.00 mm to 2.00 mm (0.0 mm D)
PAPER COLOR SET
Performs ine adjustment when faint white dots or other visual problems occur in the print
results. Lower the setting when there are faint white dots occur and raise the setting when
high density areas become lighter:
0 +1 +2 -2 D -1
SMR SETTING
YELLOW Corrects uneven printing due to differences in the print density/print frequency or tem-
perature/humidity. Change the yellow setting when the image is uneven:
0 D +1 +2 +3
-3 -2 -1
MAGENTA Corrects uneven printing due to differences in the print density/print frequency or tem-
perature/humidity. Change the magenta setting when the image is uneven:
0
D
+1 +2 +3
-3 -2 -1
CYAN Corrects uneven printing due to differences in the print density/print frequency or tem-
perature/humidity. Change the cyan setting when the image is uneven:
0
D
+1 +2 +3
-3 -2 -1
BG SETTING Corrects uneven printing due to differences in the print density/print frequency or tem-
perature/humidity. Change this value when the background is dense:
0
D
+1 +2 +3
-3 -2 -1
DRUM CLEANING Set ON to reduce white horizontal streaks that appear in the print results. The lifetime of
the image drum is shorter when this is set to ON:
ON
OFF
D
HIGH HUM. MODE Set ON when the printed paper curls greatly:
ON
D
OFF
NARROW PAPER
SPEED
Sets the print speed of narrow paper:
NORMAL
D
= the print speed is not switched when printing on narrow paper. If tempera-
ture adjustment occurs, the device operates at low speed until printing
stops.
MODE1 = The print speed is switched to low speed when printing on narrow paper.
74