Custom Audio Electronics TK306, Руководство пользователя

Страница: 64 / 216

6.5 Printing and checking a report
To print and check the value set in the device, use cut sheet or roll paper without a mark. The operation is not guaranteed
for other paper.
When printing on cut sheet prepare paper that is 74 mm wide and 210 mm long. You can print on A4 or letter paper that
has been cut to a quarter of its long side.
Print after setting Menus > Feeder Conig > Paper Form > Cut Paper (see
paragraph 7.1 ).
When printing on roll paper prepare without a mark that is 74 mm to 86 mm wide.
Print after setting Menus > Feeder Conig > Paper Form > Continuous Paper and Menus > Feeder Conig > Cut Type >
Length (see paragraph 7.1 ).
Proceed as follows:
•
Conirm that “Ready to print” is displayed on the device.
R E A D Y T O P R I N T
• Press
∧
or
∨
to display “Print info”.
P R I N T I N F O
• Press OK.
P R I N T I N F O
• Press OK when “Configuration / Execute” is displayed.
C O N F I G U R A T I O N
E X E C U T E
• Load the paper displayed on the screen in the device.
• Press OK.
64