Curtiss-Wright R-NET, Техническое руководство

Страница: 85 / 206

Curtiss-Wright | PG Drives Technology
SK77981-14
85 | R-net Technical Manual | Chapter 3 – Programming
The Left Throw can also be set interactively with the user actually deflecting the joystick. See Interactive Setting Explained .
7.21 JOYSTICK RIGHT THROW - (RIGHT THROW)
This sets the amount of right movement of the joystick that is required to reach full right turning speed. This is particularly
useful for users with limited hand movement.
The programmable range is 25% to 100% in steps of 1%.
The percentage value corresponds to the amount of joystick deflection required to reach full right turning speed. For example, if
set to 50%, then only half joystick movement is need to reach full speed.
The Right Throw can also be set interactively with the user actually deflecting the joystick. See Interactive Setting Explained .
INTERACTIVE SETTING EXPLAINED
Setting the joystick throw interactively can only be achieved using OBP or a DTT.
To navigate and make selections in OBP use the joystick, deflecting it left, right, up and down as required. When a menu item is
highlighted deflect the joystick to the right to enter.
If an item name is abbreviated then deflecting the joystick to the left will display its full name. A second deflection to th e left
will exit the current screen.
Once a parameter has been selected using the Speed Up and Speed Down buttons on the JSM’s keypad will effect changes,
unless an on screen message details otherwise.
To set Throw Interactively using OBP use the following procedure:

Enter OBP and select Controls.

From the Controls Menu select Joystick.

From the Joystick Menu select Active Throw.

From the Throw Menu set which Profiles will be affected by the interactive setting. This is achieved by placing a tick
next to the Profiles required and a cross by the Profiles not required. Use the Speed Up and Down buttons to change
the setting.

Once this is complete deflect the joystick to the right while any of the Profiles are Highlighted. This will enter the
Interactive Throw programming procedure.

Follow the on-screen instructions

After the Right direction has been set the R-net will go through a configuration process, an hourglass will be displayed
during this time.

Once the configuration is complete a large tick will be displayed on the screen for a short time and then the Joystick
Menu will be displayed.
7.22 JOYSTICK DEADBA ND - (DEADBAND)
This sets the size of the joystick’s neutral area. In other words, how far the joystick has to be deflec ted before the brakes are
released and drive commences.
The programmable range is 10% to 50% in steps of 1%. A normal setting is 10%.