Curtiss-Wright | PG Drives Technology
SK77981-14
31 | R-net Technical Manual | Chapter 1 - Operation
The intelligent speed control system minimizes the effects of slopes and different types of terrain.
WARNING:
The wheelchair user must be capable of driving a wheelchair safely. Curtiss-Wright accepts no liability for losses of any kind
arising from failure to comply with this condition.
9.3
SLOW OR SLUGGISH MOVEMENT
If the wheelchair does not travel at full speed or does not respond quickly enough, and the battery condition is good, check the
maximum speed setting. If adjusting the speed setting does not remedy the problem then there may be a non -hazardous fault.
Contact your service agent.
10
PRECAUTIONS FOR USE
NOTE:
In the event of the wheelchair moving in an unexpected way RELEASE THE JOYSTICK. This action will stop the wheelchair
under any circumstances.
10.1
HAZARDS
Do not drive the wheelchair:
Beyond restrictions indicated in your wheelchair user manual , for example maximum inclines, curb height etc.
In places or on surfaces where a loss of wheel grip could be hazardous, for example on wet grassy slopes.
If you know that the control system or other crucial components require repair.
WARNING:
Although the R-net control system is designed to be extremely reliable and each unit is rigorously tested during manufacture,
the possibility of a system malfunction always exists (however small the probability). Under some conditions of system
malfunction the control system must (for safety reasons) stop the chair instantaneously. If there is any possibility of the user
falling out of the chair as a result of a sudden braking action, it is imperative that a restraining device such as a seat be lt is
supplied with the wheelchair and that it is in use at all times when the wheelchair is in motion. Curtiss-Wright accepts no
liability for losses of any kind arising from the unexpected stopping of the wheelchair, or arising from the improper use of the
wheelchair or control system.
Do not operate the control system if the chair behaves erratically, or shows abnormal signs of heating, sparks or smoke. Turn
the control system off at once and consult your service agent. Curtiss-Wright accepts no liability for losses of any kind arising
from failure to comply with this condition.
Electronic equipment can be affected by Electro Magnetic Interference (EMI). Such interference may be generated by radio
stations, TV stations, other radio transmitters and cellular phones. If the chair exhibits erratic behavior due to EMI, turn the
control system off immediately and consult your service agent. Curtiss-Wright accepts no liability for losses of any kind
arising from failure to comply with this condition.
Содержание R-NET
