Curtiss-Wright R-NET, Техническое руководство

Страница: 52 / 206

Curtiss-Wright | PG Drives Technology
SK77981-14
52 | R-net Technical Manual | Chapter 2 - Installation
If the hardware dongle method is set, then a Curtiss-Wright OBP Dongle needs to be connected to allow access to OBP. To use
the dongle, follow the sequence below:

Turn off the control system.

Insert the R-net Dongle along the communication cables in the system configuration.

Turn on the control system

After initialization press the Mode key until the OBP screen is reached. See following diagram.

After initialization OBP will be automatically entered.
If the keycode method is set, then the following button sequence will allow entry to OBP. Note, a dongle will also allow OBP
access if this method is set.

Hold down the Horn button and then hold down the On/Off button until there is a short bleep. Note, the normal
power-up sound will occur prior to this bleep.

Release the Horn button, but continue to hold down the On/Off button until there are two further short bleeps.

Release the On/Off button, there wil l now be a longer bleep and OBP mode will be entered. See previous diagram.
WARNING:
If the keycode method is set, then it may be possible for a wheelchair user to gain entry to the OBP function. Curtiss-Wright
accepts no liability for losses of any kind if this method of OBP is set. Curtiss-Wright also accepts no liability for losses of any
kind if OBP access is gained by unauthorised personnel obtaining a dongle.