53
EXPERT 64+, rev.12
EXPERT 64+
Sunrise —
When a cycle starts, the light
intensity increases from its minimum to
its maximum intensity over this delay (see
previous graph). Set the sunrise delay to
the desired value (from 1 to 60 minutes).
*
Accessible if the “lights on 24 hours” option is
disabled above.
Sunset —
When the stop time of a light
cycle is reached, the light intensity gradually
decreases from its maximum to its minimum
intensity over this delay (see previous graph).
Set the sunset delay to the desired value
(from 1 to 60 minutes). *
Accessible if the “lights
on 24 hours” option is disabled above.
Number of Cycles —
Select how many cycles
must be performed during the selected light
program. Adjustable from 1 to 6 cycles.
*
Accessible if the “lights on 24 hours” option is
disabled above.
Cycle Selection —
Select the desired light
cycle. The following parameters are related to
this cycle: *
Accessible if the “lights on 24 hours”
option is disabled above.
Start Time —
Set the time at which the
selected cycle starts. Make sure light cycles
never overlap each other. *
Accessible if the
“lights on 24 hours” option is disabled above.
Stop Time—
Set the time at which the light
intensity starts decreasing (sunset). *
Acces-
sible if the “lights on 24 hours” option is disabled
above.
Standard Intensity —
Set the normal light
intensity of the light cycle. This parameter
ranges from the minimum light intensity to
100%. *
Accessible if the “lights on 24 hours” op-
tion is disabled above.
Use Light Peaks? —
Select
“Yes”
to use light
peaks or select
“No”
to disable them.
Peak Cycle —
Select how much time is
required to perform a light peak cycle (see
previous graph). The cycle time must be
even or longer than the peak du peak
s peak sunset. *
Accessible if light peaks
are enabled above.
Peak Duration —
Select during how much
time the light peak intensity must be main-
tained (from 1 to 59 minutes). *
Accessible if
light peaks are enabled above.
Peak Intensity —
Set the light peak intensity
to the desired value. It ranges from the “Stan-
dard Intensity” parameter value to 100%.
*
Accessible if light peaks are enabled above.
Peak Sunrise / Sunset —
Select the duration
of the peak sunrise and sunset (see previ-
ous graph). These parameters range from
1 to 60 minutes. *
Accessible if light peaks are
enabled above.
Worksheets are available at the end of
this manual to write down your light
settings.
Содержание EXPERT 64 Plus
Страница 1: ...EXPERT 64 Temperature Controller User s manual...
Страница 62: ......
Страница 76: ...M 890 00077 rev 12 REV 07...
