Cumberland EXPERT 64 Plus, Руководство пользователя

Страница: 55 / 76

55
EXPERT 64+, rev.12
EXPERT 64+
10. MONITORING FUNCTIONS
10.1. Current Conditions
This menu displays the current reading of the
controller’s probes. Refer to the installation
chapter to activate the different probes and
outputs. This menu is automatically selected
after 4 minutes of inactivity.
1. Select:
»
1. Current Conditions
Exit: Press Back Change: Press Modify
Press to select an item
Current Conditions
C Clear Thermostat Warning? Yes
Running Program : Program 1
Animal Age 5 days
House Set Point 70.0 °F
Average House Temperature 68.0 °F
Minimum House Temperature 67.5 °F
Maximum House Temperature 68.5 °F
Outside Temperature 84.2 °F
Relative Humidity 0 %
Min Vent. On Time 1:30 (m:s)
Min Vent. Cycle Time 5:00 (m:s)
Today Water 1 consump. 15 gal
Today Water 2 consump. 15 gal
Clear Thermostat Warning ? — Each time
a variation of 4°F (2.2°C) is applied on the
house set point, the warning message
“!!!
Adjust Backup Thermostats !!!”
prompts on
screen. Select
“Yes”
to clear this message
once the backup thermostats have properly
been adjusted.
10.2. Individual Temperature
Probe Readings
This menu gives the current reading of
each individual temperature probe as well
as the minimum and maximum readings of
each probe for the past 7 days. Refer to
the installation chapter to activate these
probes.
1. Select:
» 2. History
»
2. Individual Probe Temp.
Display Probe 1
Temperature 77.0 °F
Date Minimum Maximum
July 19 2004 00:34 74.0 12:34 80.2
July 18 2004 02:19 73.4 19:58 71.3
July 17 2004 01:28 72.0 14:34 82.1
July 16 2004 22:21 72.5 12:12 82.2
July 15 2004 08:34 73.3 12:14 79.3
July 14 2004 01:14 75.1 16:32 79.2
July 13 2004 04:52 73.3 13:28 80.7
July 12 2004 05:39 74.2 15:33 79.2
Exit: Press Back Change: Press Modify
Press to select an item
Individual Probe Temperature 7 days
2. Choose the desired probe. The selected
probe’s current temperature and history are
displayed.