Crown Boiler PHNTM399, Инструкция по установке и эксплуатации

Страница: 5 / 120

5
I. Product Description, Specifications and Dimensional Data
Phantom Series boilers are condensing high efficiency
gas-fired direct vent hot water boilers designed for use in
forced hot water space heating systems, requiring supply
water temperatures of 190°F or less. These boilers have
special coil type stainless steel heat exchangers, constructed,
tested and stamped per Section IV ‘Heating Boilers’ of
ASME Boiler and Pressure Vessel Code, which provide a
maximum heat transfer and simultaneous protection against
flue gas product corrosion. These boilers are not designed
for use in gravity hot water space heating systems or
systems containing significant amount of dissolved oxygen
(swimming pool water heating, direct domestic hot water
heating, etc.).
This manual is for use with boilers having a part number
ending in “B” (example: PHNTM399HNL17UB).
Table 1B: Dimensions (See Figures 1A and 1B)
Dimension
Boiler Model
PHNTM399 PHNTM500
A - Inch
(mm)
28-7/8
(734)
44-7/8
(1140)
B - Inch
(mm)
6-3/16
(157)
22-1/8
(562)
C - Inch
(mm)
13-1/16
(332)
29
(737)
D - Inch
(mm)
23-3/4
(602)
39-11/16
(1008)
E - Inch
(mm)
15-13/16
(402)
29-3/8
(752)
Gas Inlet F
(FPT)
3/4” 3/4”
Return G 1-1/2” (FPT)
Supply H 1-1/2” (FPT)
Condensate Drain J
Factory Provided Socket End Compression Pipe Joining
Clamp for 3/4” Schedule 40 PVC Pipe
Boiler Two-Pipe
CPVC/PVC Vent Connector
(Figures 1A and 1B) - Inch
4 x 4
Table 1A: Specifications
Specification
Boiler Model
PHNTM399 PHNTM500
Altitude (ft. above sea level) - USA 0-7000 0-7000
Altitude (ft. above sea level) - Canada 0-4500 0-4500
Fuel Shipped for Natural Gas, Field Converted for LP Gas
Max. Setpoint Water Temperature (°F) 190 190
Max. Allowable Working Pressure (psi) 160 160
Factory Supplied Safety Relief Valve (psi)
*
50 50
Boiler Water Volume (gal.) 3.4 4.2
Heat Transfer Area (sq. ft.) 41.8 50.8
Approx. Shipping Weight (lb.) 304 350