manualshive.com logo in svg

Crowcon I-Test, Руководство пользователя, Страница: 91 / 125

Поделиться
Скачать
Crowcon I-Test Скачать руководство пользователя страница 91

91

4.1.1 Home screen

The I-Test display screen is divided into the following areas:

Figure 72: Display screen areas

À

 Date & time 

Á

 Banner 

Â

 Icon area

 

4.1.2 I-Test Safe Shutdown

If it is required to remove power from I-Test either by removing the power lead or switching off via the 

on/off push button, then the following process must be followed to safely power down I-Test.

The safe shutdown icon 

 can be seen on the home screen 

When the icon indicates a cross 

 then I-Test should not be switched off or have power removed.

To switch off I-Test use the arrow keys to navigate to the safe shutdown icon.

Press the 

OK

 key and the icon will change to display a tick 

 this indicates that I-Test can now 

safely have the power removed or be switched off (flashing tick indicates time out for safe shutdown 

about to expire).

The icon will revert back to the 

 after approximately 15 seconds if the 

OK

 is not pressed. 

 i

I-Test must not be switched off or have power removed whilst the 

 is shown

I-Test

13 May 2013 11:30:45

À

Á

Â

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Содержание I-Test






























































































































Отзывы:

Нет отзывов