49
X
When all selections have been made click Save Selected Items to download the configuration file
to I-Test, or Cancel to abort the download. The Save Configuration screen will be displayed.
X
If the save configuration process fails the following message will be displayed and the download
must be repeated.
Figure 31:
Save configuration to I-Test failed message
X
If it is also required to save this configuration to the database, click Save to Database (see
).
X
If it is also required to save this configuration to a USB Memory Stick connected to the I-Test USB
port, click Save to USB Memory Stick (see
X
Otherwise click Finish to return to the Home screen or click Back to return to the configuration file.
i
If the Save configuration to I-Test failed – check connection message is displayed at any
point during a configuration download, the download MUST be repeated. If a successful
download is not undertaken I-Test may not function correctly.
i
After a configuration upload before I-Test can be used it must be disconnected from the
PC and restarted.
i
When an I-Test configuration is uploaded to I-Test Manager from an I-Test, not all
configuration data is uploaded (see
). It is therefore strongly recommended
that upon download of a configuration to I-Test a copy of this configuration is saved to
the database and stored as the master configuration for the specific I-Test as a future
reference of the configuration downloaded.
It should also be noted that a user has the ability to change a limited set of I-Test
configuration settings via the I-Test keypad in the field. Therefore the master copy of
the database configuration may not entirely match the configuration uploaded to I-Test
Manager from I-Test at a later date, as changes may have been made directly on I-Test in
the field (see
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification