Crowcon I-Test Скачать руководство пользователя страница 28

Страница: 28 / 125

Save As:

Enables a new cylinder profile to be created.

Once saved the new cylinder profile will be stored to the database and will be

visible in the Defined Cylinders list.

The saved cylinder profile name will also be the name shown on the screen of

the I-Test when the configuration is transferred and the cylinder assigned to

the gas inlet.

Save:

Saves the alterations against the original cylinder profile (Edit profile only).

Cancel:

Aborts any changes.

At this stage of I-Test configuration the cylinder profile will contain the standard gas concentrations;

the actual level of gas in the cylinder is entered during ‘Inlet Configuration’ see

page 40

Once the cylinders have been defined in the Manage Cylinders section the I-Test can now be fully

configured as detailed in the create new configuration section.

Note: When calibrating O

sensors I-test uses the purge inlet and calibrates on fresh air.

The O

sensor will then be bump tested with the cylinder O

gas to ensure correct operation (note

this bump test will only be undertaken on Gas-Pro monitors configured with firmware versions 1V16

& 2V06 onwards).

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test

Manager

Configuring

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Содержание I-Test






























































































































Результаты поиска

Содержание I-Test

Отзывы:

Crowcon I-Test, Руководство пользователя, Страница: 28 / 125

Результаты поиска

Содержание I-Test

Отзывы: