manualshive.com logo in svg

Crowcon I-Test, Руководство пользователя, Страница: 26 / 125

Поделиться
Скачать
Crowcon I-Test Скачать руководство пользователя страница 26

26

3.7.1.1 

Edit or create a new profile

To create a new profile or edit an existing one, proceed as follows:

 

X

Click 

New

 to create a new profile.

 

X

To edit an existing profile, click on the cylinder profile in the 

Defined Cylinders

 list so that it is 

highlighted and then click 

Edit

.

Alter the following fields as required:

Cylinder type:

  

To create a new cylinder profile select the required cylinder type from the drop 

down list.Cylinder options are tri, quad or quin.

Suitability:  

Select the use(s) for which this cylinder is suitable by clicking on the relevant 

tick boxes. 

Suitability options are speedy bump, smart bump , calibration and cross 

calibration. 

When calibration is selected speedy bump and smart bump are automatically 

selected. 

When cross calibration is selected calibration, speedy bump and smart bump 

are automatically selected. 

Note: Smart bump functionality is only applicable to Gas-Pro, T4 will only 

undertake a speedy bump test.

 i

Crowcon recommend calibration standard gases are used for calibration functions to 

ensure accurate calibration of the gas monitor under test.

 

Two calibration options enable the flammable sensor in the gas monitor to be 

tested with either target gas or, if required, the C

5

H

12

, C

3

H

8

 and C

4

H

10

 sensors 

can be tested with CH

4

 when the cross calibration option is selected.

 i

Unless the cross calibration option is selected gas monitors must only be bump tested or 

calibrated with target gas.

Calibration:

 

This option should be selected if flammable sensors in all gas monitors to be 

tested by I-Test are to be calibrated with target gas only. 

For example if flammable sensors in all the monitors are CH

4

 and the cylinder 

to be used for testing contains CH

4

, then this option should be selected.

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Содержание I-Test






























































































































Отзывы:

Нет отзывов