Crowcon I-Test, Руководство пользователя, Страница: 57 / 125

57
3.9.2 Upload Configuration from Database
This option enables a configuration to be uploaded from the database.
This configuration can then be altered as required and saved to an I-Test (see page 48 ), renamed
and then saved to the database or (with limited functionality) saved to a USB Memory Stick
connected to a USB port (see page 52 ).
To load a configuration file from the database, proceed as follows:
X
Select Load from Database from the Home page. The Select configuration dialogue box will be
displayed (see below).
Figure 37: Select configuration dialogue box
X
Click on the required configuration so that it is highlighted and then click Select . The Overview
screen will then be displayed (see Figure 38 ).
The dialogue box will show saved configurations for the monitor type I-Test manager is currently
configured for. To see saved configurations for all monitors click the Show All tick box.
From this screen the following functionality can be changed:
• I-Test settings (see page 31 )
• Inlet configuration (see page 40 )
• Field configuration (see page 41 )
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification