77
To clean the filter:
1. Completely stop all sprayer functions.
2. Place the tank selection valve in the closed position to
shut off liquid from the main tank.
3. Remove the outer filter screw and bowl.
4. Remove the filter screen & thoroughly clean it and
other components before reassembling the filter.
5.
Carefully reassemble the filter, ensuring the screen
O-Rings are in place, and then, tighten the outer filter
screw so that the outer O-ring is properly sealed.
6.
Open the tank selection valve
to access liquid from
the main tank, then check the filter is sealed correctly.
If leaking, further tighten the outer screw until sealed.
If this does not stop the leaking, check the alignment
of the O-ring and/or the condition of the O-ring.
Replace if necessary.
Vaseline is the best lubricant for filter seals.
In-line Pressure Filters
The in-line pressure filter should be cleaned regularly, or
after each spray tank has been emptied.
To flush each filter, open and close the filter tap while the
system is pressurised.
The filter & bowl assembly will need to be disassembled for
thorough cleaning.
For Major Servicing follow the pre-delivery
Checklist that came with the sprayer.
SECTION 9
LUBRICATION & MAINTENANCE
Remove the outer filter screw and bowl
NOTE
Be careful not to damage or deform the
mesh or O-ring while cleaning and refitting
the suction filter.
If the fi lter screen or O-ring is damaged,
replace the part.
Reassemble and tighten the outer filter screw.
Open & close the filter tap while system is pressurised
Remove & clean the filter element & components
CAUTION
!
Ensure the TANK SELECTION VALVE IS
OPEN before starting the pump.
Starting the pump with the Tank Selection
valve closed will seriously damage the suction
valve and warranty will be made void.
W
EAR GLOV
ES
W
EAR GLOV
ES
W
EAR GLOV
ES
