manualshive.com logo in svg

Croplands HTP3 QMQ12, Руководство оператора

Поделиться
Скачать
Croplands HTP3 QMQ12 Скачать руководство пользователя страница 13

13

SECTION 4

PRODUCT FEATURES / FAMILIARISATION

Fan Guards

The QM-420 must never be used without the front and rear 
guards installed.

Operational limits

The nominated maximum operating speed of the fan is 
3,000 rpm. Normal delivered maximum operating speed 
of 2,500 rpm. Exceptions apply. 

DANGER, Stay well away from rotating fans.

 

Whilst the front (downwind) side may appear to be the 
more dangerous side, it’s the back side that holds greater 
danger as it can suddenly suck body parts or objects in.

Fan Frame Mounting

Each Spray fan is mounted via dual M12 brass inserts 
moulded into each side of the cowling. 

The normal Spray fan mounting method is via special 
stainless-steel clamps into the “Fan Frame”.
The bracket is reversible and can be used to adjust head 
positioning (see more page 41).

Check Valve / stop cock / drain

The feed to each spray ring is fitted with a “non-drip” 
diaphragm check valve with integral stop cock which allows 
individual spray rings to be manually shut off as required. 
Screw the red cap 

in for stop

, out for normal diaphragm 

“non-drip”.  Each spray ring has a draining / flush tap on 
the exit. 

FAN FRAMES, BOOM ARMS & TIE RODS

Fan Frames

Mounting the fans into the fan 
frames has many advantages, 
including the ability to specify 
exact positioning of fan heights 
and angles. The fans remain 
well protected and fixed until a 
change is required. 
Up to 3 fans can be installed in 
each fan frame – with the lower 
fan also using a leaf guard (not 
shown here)….

More about setting up and 
operating the fans (and 
booms) in Section 5.

Boom Configurations

All QM Smart Spray models  
use the same rear (inner row), 
width adjustable booms arms  
at the rear of the sprayer  
(Photo 1), with individual 
fan frames, connected via a 
breakaway swivel head.
2-Row Sprayers also use individual fan frames, connected 
via a breakaway swivel head at the end of the main boom 
arms (Photo 2). 
3-Row sprayers use the same main boom arms, but instead 
of an individual fan frame at the end of the boom, a “Twin 
Hanger” is used to support a pair of fan frames at the end 
of the main boom arms. (Photo 3). One set of fans pointing 

Содержание HTP3 QMQ12




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды