HT-OMSMART-A
30
SECTION 5
PRE-OPERATION
(4)
Connect the Hydraulic Hoses to the Tractor
Its important to correctly set up the hydraulic supply from
the tractor. Your dealer can carry out this step to ensure no
damage or warranty issues will result from incorrect setup.
A small charge may be incurred for this procedure.
• For models featuring the Micro Power Pack using
twin pumps, there are no hydraulic hoses to connect
to the tractor.
• For models with a single pump, Micro Power Pack
there is one set of hydraulic hoses (from the spray
pump) for connection to the tractor remotes.
• For models without Micro Power Pack, there is one set
of hydraulic hoses to connect to the tractor.
o A set of hydraulic hoses to the main Fusion block,
and return to tractor pressure free return port via the
oil cooler.
• There are no boom arm connections as these are an
integral part of the Fusion control system.
Note
all Croplands sprayers use banded, colour coded
hydraulic hoses. The pressure line is always 2 bands and
the return line is always a single band.
Oil supply (and return) to fans is always
YELLOW.
Oil supply to the product pump is always
WHITE
(not red
as per photo top right).
For models without a Micro Power Pack, oil supply to the
fans (via the Fusion control block) requires a ½” pressure
line connection to tractor remote, and a ¾” return, DIRECT
BACK-TO-TANK.
• Decide on the best supply remote on your tractor to use
for oil supply for the fan system.
• Plug the ½” oil supply line coupling to your selected
remote and ensure the hydraulic line does not foul your
PTO or any working parts at the rear of the tractor.
Allow sufficient slack in the hydraulic line for turning.
• Hook up the ¾” return line to the tractor (direct back to
tank). As with the pressure line, ensure there is sufficient
slack & no interference with tractor working parts.
NEVER connect the return line to the conventional
return port.
NOTE;
Supplied with each non Micro Power Pack unit is a
¾” fitting for the tractor’s return to tank port, as shown
and circled in
orange
(above). This is to ensure there is
