HT-OMSMART-A
52
12. Turn the spray sections ON using the Joystick,
TRIGGER DOWN.
(MASTER is yellow, in MANUAL plus green section
lights ON).
a. Make sure the area around the fans is clear of
bystanders.
b. Make sure the fans are downwind of the operator.
13. After sufficient flushing, turn OFF the spray sections
using Joystick, TRIGGER DOWN.
14. Turn on the fan Spray ring flushing taps (photo shows
the closed position).
15. TRIGGER DOWN / ON and flush the remainder of
the spray ring.
16. TRIGGER DOWN / OFF, turn off spray ring drain taps.
17. Some water will have flowed back to the main tank
due to the flushing actions and drained out of the tank
through the drain outlet.
18. On completion of flushing, shut down all controls and
disengage the PTO / hydraulic drive
19. Check and clean all filter screens as required.
20. Adjust all valves back to operating (non-flushing) mode:
a. Close mixing basket valve
b. Close tank drain valve
c. Open Tank Selection Valve to the SPRAY position
d. Open the agitator valves
21. Wash / hose down the outside of the sprayer.
TANK AND EQUIPMENT CLEANING
If a cleaning agent is required (refer to chemical label),
as is often recommended when changing from one
chemical group to another or as an end of season clean
before storage.
Nufarm’s Tank and Equipment Cleaner is a suitable
cleaning agent. Note this product is available from
Croplands Dealers under part code L-H9704.
SECTION 6
SPRAY OPERATIONS
