manualshive.com logo in svg

Croplands HTP3 QMQ12, Руководство оператора

Поделиться
Скачать
Croplands HTP3 QMQ12 Скачать руководство пользователя страница 4

HT-OMSMART-A

4

SECTION 1

IMPORTANT INFORMATION 

ABOUT THIS MANUAL 

This manual provides assembly, setting up, operating and 
maintenance instructions for the Croplands (Quantum Mist) 
SMART SPRAYER. 
In addition to this manual, the sprayer will be delivered 
with the General Safety Manual (GP-SAFE-A), Fusion 
Controller Manual (HT-FUSION-A) and Micro Power Pack 
Manual (HT-OMMICRO-A). For details not covered by 
this Guide or the Quantum Mist Manual, please contact 
Technical Support. 
Some features explained in this manual may not be 
installed on your sprayer.
Please pass on this manual with the sprayer at the time of 
resale for usage by the new owner.
This manual, HT-OMSMART-A, was first published in  
September 2020.

Check online

 as there may be more recent revisions of 

this manual.

TERMINOLOGY 

These terms/symbols used throughout  
this manual:

NOTE

This Note sign is in place to convey useful 

information and will help you to identify 

the best possible way to operate the 

machine.

CAUTION

This Caution sign shows the potential 

for an incident. An incident may include 

damage to the machine itself, or possible 

injury to the operator.

WARNING

This warning sign shows the potential for 

risk or injury and highlights the need for 

steps to be taken to protect one’s safety.

DANGER

This Danger sign will be used in areas where 

the highest risk is present. Always read the 

information on these signs and ensure you 

are taking steps to prevent risk or injury.

BEFORE OPERATING YOUR SPRAYER

Before attempting to use your sprayer, make sure you  
read all Operator Manuals for this sprayer including but 
not limited to:

This Operator’s Manual, 

and all other supplied 

manuals

 for items such as Micro Power Pack, Pumps, 

PTO etc.

And properly understand:

•  All Safety Issues.
•  Assembly & Installation instructions.
•  Calibration of the sprayer.
•  Sprayer Operation.
•  Sprayer Maintenance.

DANGER

!

Probability of death or serious 

injury if an accident occurs 

WARNING

!

To stress potential dangers and the

importance of personal safety.

CAUTION

!

To highlight potential injury or

machinery damage.

NOTE

To convey useful operating information.

Содержание HTP3 QMQ12




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды