manualshive.com logo in svg

Croplands HTP3 QMQ12, Руководство оператора

Поделиться
Скачать
Croplands HTP3 QMQ12 Скачать руководство пользователя страница 24

HT-OMSMART-A

24

SECTION 4

PRODUCT FEATURES / FAMILIARISATION

TIERED SPRAYING

Dual spray rings make it possible to achieve a greater 
application rate spectrum, more consistent spray pressures, 
reduces nozzle changes & helps eliminate off target spray 
drift via 3 Tier spraying. 

• Tier1 / Low rates = Inner rings ON / Outer rings OFF.
• Tier 2 / Medium rates = Inner rings OFF / Outer rings 
ON.
• Tier 3 / High rates = Inner & Outer rings ON.

All sections are activated via in cab Fusion screen  
& Joystick control.

Note; Smart Sprayers are using the convention of:

• The smaller / inside spray ring uses the smaller nozzles.
• The larger / outer spray ring uses the bigger nozzles.

Note

 both rings use the same diameter stainless steel tube, 

it’s the circumference of the ring that’s smaller or larger.

Operators can change nozzles to suits their specific 
requirements – it might be the same nozzle on every spray 
ring, or it might be a specialist nozzle on either of the spray 
rings. The choices are never-ending.

Photo 1 shows inlet (top) and outlet (tap at the bottom) of 
the outer / larger diameter spray ring. To the inside shows 
the inner spray ring which has similar connections on the 
opposite side.

4 Section control (Photo 2)

For a 2 row sprayer:

 

LL

  Left outer rings

 

L

  Left inner rings

 

R

  Right inner rings

 

RR

 Right outer rings

Using L and R together is Tier 1, all fans are spraying  
with the inner spray ring.

Using LL and RR together is Tier 2, all fans are spraying 
with the outer spray ring.

Using LL, L, R & RR together is Tier 3, all fans and all 
sprayer rings are in operation.

8 Section control (Photo 3)

For a 3-row sprayer.

LL

 is the left 3rd row fan, and can be operated as Tier1 

only, Tier 2 only or Tier 3 with both T1 & T2 together.

L

 are the left 1st & 2nd row fans and have the same T1,  

T2 and T3 options.

R 

are the left 1st & 2nd row fans and have the same T1,  

T2 and T3 options.

RR

 is the Right 3rd row fan, and can be operated as T1 

only, T2 only or T3 with both T1 & T2 together.

See Section 6 and the separate Fusion Manual for more 
information on operating the controller & spray system.

LL

L

R

RR

Photo 1

Photo 2

Содержание HTP3 QMQ12




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды