Covidien Puritan Bennett 560, Руководство пользователя

Страница: 88 / 150

Installation and Assembly
4-20 User’s Manual
4.12 Connecting the Nurse Call Cable
Connect the Nurse Call cable ( Figure 4-20 , item 1) to the Nurse Call Monitor Connector (item 2).
Figure 4-20. Connecting the Nurse Call Cable
Warning
Before using the Nurse Call system, ensure that its connections are secure and it operates
properly. For more information, contact Covidien.
To connect the ventilator to a Nurse Call device, contact Covidien to check the ventilator's
compatibility with the Nurse Call device and order a suitable connection cable.
Do not use Nurse Call devices that operate based on the closure of an electrical circuit, because
the devices often do not take into account possible cable disconnection or a total loss of power.
Ensure that the Nurse Call device is always connected to the ventilator.
The Nurse call function provides for remote alerts of ventilator alarm conditions (for example, when the venti-
lator is used in an isolation room), and features the following:
•
The ventilator signals an alarm using a normally open (NO) or a normally closed (NC) signal.
•
A remote alarm is activated when an alarm condition occurs, unless either of the following is
true:
•
The audio paused function is active.
•
The ventilator power switch is OFF.
•
The remote alarm port is an 8-pin female connector; allowable current is 100mA at 24VDC
(max).
1
2