Covidien Puritan Bennett 560, Руководство пользователя

Страница: 72 / 150

Installation and Assembly
4-4 User’s Manual
•
The AC POWER indicator on the top left corner of the ventilator illuminates.
•
The indicator flashes while the battery charges and then turns off when the battery
is fully charged.
Refer to Figure 4-4 on page 4-4.
If the AC power cable becomes disconnected or the AC power source fails, an “AC POWER DISCONNEC-
TION“ alarm signals an automatic switch to the external DC power source (if the
DC power cable is connected) or to the ventilator’s internal battery.
One of three power indicators, located on the upper-left of the ventilator’s front panel, illuminates to signal
which of the three possible power sources are currently in use by the device (refer to
Figure 4-4 ).
Figure 4-4. Power Indicators
To disconnect the AC power cable:
1. Disconnect the AC power cable from the AC power outlet.
2. Disconnect the AC power cable from the ventilator’s AC connector at the rear of the device.
3. Grasp the AC power cable at the level of the power cable holder and turn the cable
counterclockwise while lifting it upwards and out of the holder.
4.3 Connecting to an External DC Power Source
Warning
Ensure that the ventilator’s internal battery is fully charged before connecting the ventilator to
an external DC power source. Powering the ventilator using an external 12– 30 VDC power
source (via the DC power cable) does not enable charging of its internal battery.
When using a car auxiliary adapter (cigarette lighter) ensure the car has been started prior to
plugging in the ventilator’s DC adapter.
Note:
The only time the AC POWER and indicators are illuminated at the same time is when the ventilator is
connected to an AC supply and the battery is charging (indicator is flashing).