Covidien Puritan Bennett 560, Руководство пользователя

Страница: 49 / 150

Alarms and Troubleshooting
User’s Manual 3-7
3.6 Re-activating Alarms
Alarms that have been paused and whose activation conditions continue to exist can be reactivated.
To reactivate alarms, proceed as follows:
1. Press the MENU key to access the Alarm Setting menu, if this is not the menu currently
displayed.
2. Press the DOWN key to position the cursor on the “Alarm Logs” line, if this is not
already
the case. Refer to the following graphic:
Figure 3-6. Reactivating Alarms
3. Press the ENTER key, to confirm access to the “Alarm Logs” menu.
4. Press the UP key to position the cursor on the “USER’S CLEAR ALERTS” line. Refer to the
following graphic:
Figure 3-7. Alarm Logs
5. Press the ENTER key for at least three (3) seconds. The following events occur:
•
A “beep” sounds.
•
An audible alarm sounds.
•
An alarm indicator illuminates.
•
The messages of all active alarms are displayed in a loop in the Ventilation and Alarm
menus.
•
The Audio Paused symbol disappears (if it was displayed).
•
The Alarm Paused symbol disappears.