Covidien Puritan Bennett 560, Руководство пользователя

Страница: 18 / 150

Safety Information
1-4 User’s Manual
•
The operator should connect the ventilator to an AC power source whenever available, for safer
operation.
•
The maximum recommended shelf life of the internal battery is two (2) years. Do not use a
battery that has been stored for two years prior to its first use.
•
Periodic recharging is important to help maximise useful life of the battery. Do not store the
internal battery for extended periods, without recharging, as this may reduce the maximum life.
•
For the AC (“mains”) power cable to be properly secured, the attachment located on the power
cable must be fitted into the power cable holder incorporated in the battery access cover and
located under the AC (mains) power socket. Refer to section
4.2, “Connecting to External AC
Power” .
•
The power supply to which the ventilator is connected (both AC and DC) must comply with all
applicable
standards and provide electrical power corresponding to the voltage characteristics
inscribed on the rear of the ventilator to ensure correct operation. Refer also to the electrical
specifications found in
Appendix A, “Specifications” .
•
Ensure that the ventilator’s internal battery is fully charged before connecting the ventilator to
an external DC power source. Powering the ventilator using an external 12– 30 VDC power
source (via the DC power cable) does not enable its internal battery to recharge.
•
Due to its limited internal battery’s reserve capacity, the ventilator should only be operated on
the internal battery when no other power source is available. Ensure that the internal battery
never becomes fully discharged.
•
When using a car auxiliary adapter (cigarette lighter) ensure the car has been started prior to
plugging in the ventilator’s DC adapter. Refer to chapter
4.3, “Connecting to an External DC
Power Source” .
•
Even if the “INTERNAL BATTERY” charging indicator is off, charging of the battery may
sometimes be incomplete if the ambient temperature is above 40 °C (104 °F) because of the
battery’s internal heat safety device.
•
When the “LOW BATTERY“ alarm is triggered, immediately connect the ventilator to an AC
power supply to maintain ventilation and recharge the internal battery.
•
Batteries should be disposed of according to environmental legislation in your country and
locality.
•
Never expose any batteries to direct flame.
•
Ensure that the AC power cable is in perfect condition and not compressed. The device should
not be turned on if the AC power cable is damaged.
Warnings Regarding Hoses and Accessories
•
The ventilator must not use, nor be connected to, any anti-static or electrically conductive hoses,
tubing, or conduits.
•
Minimum and maximum VTE alarm parameters must be properly set to warn in the event of
patient disconnection.
•
Before opening the packaging for the Patient Circuit, ensure that no damage is evident to the
packaging or its contents. Do not use if evidence of damage exists.
•
The patient circuit should not be changed during ventilation.
•
On a DAILY basis, inspect the patient circuit to ensure that it shows no signs of damage, is
properly connected, and is operating correctly without leakage.
•
Single Use accessories should not be reused.