Covidien Puritan Bennett 560, Руководство пользователя

Страница: 94 / 150

Operating Procedures
5-6 User’s Manual
•
The parameter selected to be modified flashes.
3. Press UP or DOWN to change the selected parameter’s value.
4. Press ENTER to confirm the new parameter setting.
•
The new parameter setting is displayed continuously.
•
The cursor is placed at the STOP position.
5. To manually stop trend transfer, press ENTER .
If a parameter change is not confirmed by pressing ENTER before seven (7) seconds elapse, the ventila-
tor resets the parameter to its previous value.
Table 5-2. Time taken to transfer trends data from the ventilator to a USB memory device
Amount of trends data
(in months)
Transfer time from
ventilator to USB memory
device
3 months Approximately 2 minutes
6 months Approximately 4 minutes
9 months Approximately 6 minutes
12 months Approximately 8 minutes
Note:
The message “TRANSFER IN PROGRESS... REMAINING TIME” is displayed during the transfer time.
Other USB memory device functions are available during transfer of trends.
If the memory capacity on the USB memory device is insufficient the message “TRANSFER NOT ALLOWED -
USB CAPACITY INSUFFICIENT” is displayed and data transfer is not allowed. Delete the data on the USB
memory device before restarting data transfer.
In case of USB memory device disconnection or transfer error, the message “TRANSFER ERROR - USB
DISCONNECTION” or “TRANSFER ERROR - TECHNICAL PROBLEM” is displayed. In this case restart the
transfer process. If the problem persists contact your technical service.