Coulomb Technologies ChargePoint CT2023, Руководство по установке

Страница: 31 / 52

4-1
Installing the head assembly
4
Before you start
You will need:
• Head assembly
• Torx Driver T25 - Tamper-Resistant. This driver is available at www.wihatools.com (Item 36281) and
www.mcmaster.com (Item 83335A64).
In addition, you must complete the installation of the body assembly, the holsters, and the cable
assemblies (see previous chapters).
Overview of steps
Installing the ChargePoint
®
Charging Station’s head assembly involves a few simple steps:
1. Check box for correct contents (see page 4-2)
2. Install head assembly (see page 4-3)
3. Verify that the station operates correctly and if necessary, refer to Chapter 5 to troubleshoot faults
(see page 4-4)
4. Secure head assembly and filler panel (see page 4-5)
5. Install front cover plates (see page 4-6)
6. Arrange for station provisioning (see page 4-7)