ChargePoint® Charging Stations
3-8
Step 5 - cont’d
Plug the cable assembly’s rectangular
connector into the left receptacle on
the body assembly’s terminal block,
ensuring it is fully seated.
Connect the ground wire to the tab at
the top of the cable assembly.
IMPORTANT!
Do not insert the
charging station’s SAE J1772
connector into the holster until after
installing the head assembly and
powering up the charging station. The
station is equipped with a locking
holster and if you insert the connector
before the station has powered up, the
holster will not unlock!
You have now finished installing the
ChargePoint
®
Charging Station’s
holsters and cable assemblies and are
ready to install the head assembly. See
Chapter 4.
