Installing the Wall Mount
2-5
Step 3 - Install channel struts
To mount the channel strut sections to
the concrete wall:
• Use the supplied wall mount
template to mark the location of
the four holes on the wall. Holes
must be 24” and 34” up from the
floor and be spaced exactly
2 1/2” apart.
• Using a Hammer drill and a 3/8”
masonry drill bit, drill four holes
2 1/2” deep.
• Install the four supplied
3/8” anchor bolts.
• Mount each channel strut to the
wall with the four 3/8” nuts and
large, thick washers supplied in the
shipping box (discard the washers
that came with the anchor bolts).
Tighten using a 3/8” drive rachet
with extension.
NOTES:
The bottom of the channel strut
should be located 20 1/2” above
the floor.
The two channel struts must be
plumb and parallel to each other.
