background image

Terra 94

All-In-One 90kW DC Fast Charger

Description

This Terra all-in-one DC fast charger offers power up to 90kW. The com-
pact, modular design makes it perfect for retail, highway or fleet use, with 
power sharing to further optimize utilization. All Terra chargers feature 
connectivity for remote services and OCPP enablement.

Key Benefits and Features

•  User friendly control interface allows for PIN or RFID accessibility

•  OCPP 1.6 standard supports integration into In-Control, In-Charge’s 

EVSE management platform

•  LTE Modem and LAN

•  TUV Certified

Specifications

•  Max Output Voltage: 90kW Max share the same housing
•  Available with CCS1, Dual CCS1, and Dual CCS1 & CHAdeMO connectors
•  DIN 70121, ISO 15118 protocols supported
•  Dimensions (D x W x H): 34.6” x 22.2” x 74.8 x”  / 880mm x 565mm x 1900mm
•  Weight: 775lbs / 350kg

The Terra 94, 124, 184  

share the same housing

Ordering Information

Configuration

SKU

Terra 94- Single CCS

ADC-90-200-C1

Terra 94- Dual CCS & CHAdeMO

ADC-90-200-C1CH

 * When ordering the ABB Terra series with CCS/CCS connectors (-CC), order 

the -CJ which is designed to handle both CCS and CHAdeMo connector types.

Summary of Contents for ADC-90-200-C1






















































































































Reviews: