3-1
Installing the holsters and cable
assemblies
3
Before you start
You will need a short or right-angle Phillips screwdriver.
Before installing the holsters and cable assemblies, complete the installation procedure for the CT2023’s
main body as described in the previous chapter.
Overview of steps
Installing the ChargePoint
®
Charging Station’s holsters and cable hangers involves a few simple steps:
1. Check boxes for correct contents
(see page 3-2)
2. Attach holsters/cable hangers to body assembly
3. Install cable assembly 2
(see page 3-4)
4. Install the filler panel
5. Install cable assembly 1
(see page 3-7)
These steps are detailed in the remainder of this chapter. When you have completed these steps, you will
be ready to install the head assembly, as described in Chapter 4.
