Installing the holsters and cable assemblies
3-3
Step 2 - Attach holsters/cable hangers to body assembly
Align the right holster with the cable
hanger and attach as follows:
• Insert the three screws/washers to
attach the cable hanger/holster to
the main body but do not tighten.
• Insert the two screws/washers to
attach the lower end of the cable
hanger to the main body.
• Tighten all five screws.
Repeat for the left holster/cable
hanger.
NOTE: Use the screws and washers
provided in the shipping box with the
bollard mount (see page 2-2).
Loosely fasten
these three
screws
Loosely fasten these two
screws, then tighten all five
screws
