ChargePoint® Charging Stations
3-2
Step 1 - Check boxes for correct contents
The ChargePoint
®
Charging Station’s cable
assemblies/holsters ship in two boxes.
Each box contains:
• Holster
• Cable assembly
• Screws (3) - DISCARD THESE*
• Washers (3) - DISCARD THESE*
• 5/32” Allen wrench
*Do not use the screws and washers provided in the
shipping box with the holsters—use the longer ones
provided in the shipping box with the bollard mount.
Cable Assembly 1 \ Left Holster:
Cable Assembly 2 / Right Holster:
NOTE:
To complete the installation steps described in
this chapter, you will also need the following
components that are included in the shipping box
for the main body (see page 2-2).
Cable hangers, screws and washers:
Filler panel:
