www.lasertools.co.uk
5475
Intelligent Battery Charger
4 in 1
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T
+44 (0) 1926 815000
F
+44 (0) 1926 815888
www.toolconnection.co.uk
If this product fails through faulty materials or workmanship, contact our
service department direct on:
+44 (0) 1926 818186
. Normal wear and tear
are excluded as are consumable items and abuse.
Guarantee
Instructions
For all 12 volt automotive battery types: lead-acid, AGM (absorbed glass mat) Gel
and deep cycle.
This charger initiates an 8-stage charging cycle which charges and maintains
the battery. Additionally there is a boost mode for battery rescue, and a steady
12v supply mode. The charger can also be used to test the battery without
connecting to a 240v AC supply. It features overload, short circuit and polarity
reversal protection.
Includes a ‘snow’ mode for charging in temperatures below 0ºC
Note: this is for AGM absorbed glass mat batteries only - never attempt to charge
a battery with frozen electrolyte.
The charger is supplied with three methods of connection:
Insulated battery clamps.
Eyelet connectors for motorcycles.
Onboard 12v connector.
