Corghi Artiglio 500, Руководство оператора

Страница: 85 / 265

Operator’s manual Artiglio 500 85
GB
ELECTRICAL DIAGRAM
Table N° 4-102882 Fig. 39
AP1 Single / two-speed motor circuit board
M1 Motor
SQ1 Two-speed microswitch
SQ2 Microswitch (CLOCKWISE rotation)
SQ3 Microswitch (ANTI-CLOCKWISE rotation)
XB1 Connector
Z1 Mains filter
GENERAL PNEUMATIC SYSTEM DIAGRAM
TABLE NO. 4-108713 FIG. 38
A – REGULATOR FILTER UNIT
1 FEMALE QUICK-COUPLING jOINT
2 REGULATOR FILTER UNIT
3 LUBRICATOR
4 PRESSURE GAUGE
5 PEDAL UNIT INFLATION LIMITING DEVICE
B – POLE TIP-UP CYLINDER CONTROL
6 BISTABLE SWITCH (VALVE 5/2 NO)
7 DOUBLE-ACTING CYLINDER D. 50
C – TOOL MOVEMENT CYLINDER CONTROL
8 BISTABLE SWITCH (VALVE 5/2 NO)
9 DOUBLE-ACTING CYLINDER D.95 MM
D – BEAD-BREAKING AND PENETRATION CYLINDER CONTROL
10 MONOSTABLE BUTTON (VALVE 3/2 NC) FOR UPPER DISK PNEUMATIC RESET
11 UPPER DISK PENETRATION SINGLE-ACTING CYLINDER
12 LEVER CONTROL (VALVE 5/3 WITH DOUBLE PNEUMATIC CONTROL)
13 DOUBLE-ACTING UPPER BEAD-BREAKER CYLINDER D. 110 MM
14 MONOSTABLE BUTTON (VALVE 3/2 NC) FOR LOWER DISK PNEUMATIC RESET
15 LOWER DISK PENETRATION SINGLE-ACTING CYLINDER
16 LEVER CONTROL (VALVE 5/3 WITH DOUBLE PNEUMATIC CONTROL)
17 DOUBLE-ACTING LOWER BEAD-BREAKER CYLINDER D. 110 MM
E – LIFT CYLINDER CONTROL
18 PEDAL (VALVE 5/3 WITH DOUBLE PNEUMATIC CONTROL)
19 DOUBLE-ACTING CYLINDER D.75 MM
F – BEAD-BREAKER APPROACH CYLINDER CONTROL
20 MONOSTABLE VALVE 3/2 NO, LEVER TYPE
21 UPPER AND LOWER SINGLE-ACTING THROTTLE CYLINDER
22 LEVER CONTROL (VALVE 5/3 WITH DOUBLE PNEUMATIC CONTROL)
23 MONOSTABLE VALVE 2/2 NO WITH PNEUMATIC CONTROL