Convotherm 4 10.10, Руководство по установке

Страница: 109 / 191

6.5.2 Connecting the grease collecting canister
Accessories required
The ConvoGrill is supplied with the following original accessories, which you need to use in order to
connect the automatic grease removal system. Use solely these original accessories:
■
Connecting tube with screw cap for screw-fitting on canister
■
Grease collecting canister (empty canister for receiving extracted grease)
■
Hose clip for securing the connecting tube on the combi oven.
■
Forked bracket for holding the canister screw-cap and connecting tube while the grease collecting
canister is being emptied and cleaned.
Connecting the grease collecting canister (ConvoGrill)
1.
Check the accessories for damage, and only continue
with the installation if all the parts are intact and leak-tight.
2.
Plug the bare end of the connecting tube (2) of the auto‐
matic grease collecting system onto the outlet pipe (1) at
the back underneath the combi oven, and secure the tube
(2) with the hose clip (3).
3.
Screw the canister screw-cap (4) attached to the connect‐
ing tube (2) onto the grease collecting canister (5).
4.
Place the grease collecting canister (5) in a suitable posi‐
tion and make sure there are no kinks in the connecting
tube (2).
5.
Fix the forked bracket (6) within reach of the outlet pipe
(1). This bracket will be used to hold the canister screw-
cap (4) and connecting tube. To fix in place, use the dou‐
ble-sided adhesive tape on the back of the bracket or the
pre-drilled holes in the bracket.
For appliances with a disappearing door:
Do NOT position the bracket (6) on that side of the combi
oven alongside which the appliance door slides back.
Installation position for the grease collecting canister
Install the grease collecting canister in accordance with the following requirements:
■
The canister must be positioned upright and with easy access beside the appliance on a flat sur‐
face.
■
The surface on which the canister sits must not lie more than 15 cm above the surface supporting
the appliance.
■
The user's work area must not be obstructed.
6 Installation
109