Convotherm 4 10.10, Руководство по установке

Страница: 28 / 191

3.6 Hazards and safety precautions when setting up the appliance
Safety hazard: moving heavy weights
Danger Where or in what situations does the
hazard arise?
Preventive action
Risk of injury from over‐
stressing your body
When moving the appliance
■
Use a forklift truck or pallet truck to
place the appliance in the installa‐
tion position or to move it to a new
position
■
Always use the correct number of
persons and observe the limits
specified for lifting and carrying
when adjusting the appliance posi‐
tion
■
Observe the local occupational
safety regulations
■
Wear personal protective equip‐
ment
Safety hazard: mechanical parts of the appliance
Danger Where or in what situations does the
hazard arise?
Preventive action
Risk of body parts be‐
ing crushed if the appli‐
ance tips over
When the appliance is being moved
off the pallet
■
Before sliding the appliance off the
pallet, make sure that the slides
are screwed firmly to the pallet
■
Take care not to let an appliance
foot slip off the side of the slide
■
Be careful when transferring the
appliance from the slide onto the
non-slip floor
Risk of body parts be‐
ing crushed if the appli‐
ance is dropped
When lifting the appliance
■
Make sure center of gravity is bal‐
anced
■
Avoid jolts
Risk of body parts be‐
ing crushed if the appli‐
ance tips over or falls
off
When installing the appliance on the
floor
Always observe the requirements for
the supporting surface while setting
up the appliance; see 'Requirements
for the installation location' on page
48
Risk of cuts from sharp
edges
When handling sheet-metal parts
■
Exercise caution when performing
these tasks
■
Wear personal protective equip‐
ment
3 For your safety
28