Convotherm 4 10.10, Руководство по установке, Страница: 17 / 191

Item Name Function
7
Suction panel
■
Distributes the heat evenly inside the cooking chamber
■
Separates the fan compartment from the cooking chamber
8
Core temperature probe,
sous-vide sensor (optional)
■
Measures the core temperature of the food being cooked
■
Available in two connection options: permanent internal con‐
nection or temporary external connection
9
Built-in preheat bridge in
appliance door
Used for safety purposes during preheating and reduces energy
wastage
10
Loading trolley Holds standard-sized food containers
11
Cooking chamber Contains the food during cooking operation
12
Recoil hand shower
(this is not fitted on certain
appliances)
■
Intended solely for rinsing out the cooking chamber with water
■
Retracts automatically into the holder after use
■
Antibacterial ("HygienicCare")
13
Side panel Covers the appliance wiring compartment
14
Appliance feet Can be adjusted in height to allow the appliance to be positioned
horizontally
15
Ventilation slots under‐
neath the appliance
■
Used for appliance ventilation
■
Must not be covered
16
Type plate Identifies the appliance
Components and function of the special security mechanism (prison model only)
The following illustration shows the optional special security mechanism for a size 6.10 gas combi
oven as an example of all appliance sizes:
Item Name Function
1
Lockable cover to the op‐
erating panel
The hinged cover can be closed over the operating panel and
locked to the appliance case in order to prevent unauthorized use
of the combi oven.
2
Padlock
■
To lock the operating panel cover to the appliance case
■
Not supplied
3
Padlock
■
To lock the appliance door to the appliance case
■
Not supplied
4
Locking mechanism for the
appliance door
Provides a two-stage lock for the appliance door to prevent unau‐
thorized opening and closing of the appliance door
Behaviour of the appliance door:
■
When the top locking position is used, the appliance door re‐
mains fully closed.
■
When the bottom locking position is used, the appliance door
can be opened as far as the venting position on table-top units
or as far as the on-latch position for floor-standing units.
2 Design and function
17