Convotherm 4 10.10, Руководство по установке

Страница: 110 / 191

7 Putting into service
Purpose of this chapter
This chapter explains how to prepare your combi oven for use. This chapter is intended for a qualified
member of staff from an authorized service company.
7.1 Safe working when putting the appliance into service
For your safety when putting the appliance into service
Before starting work, make sure that you are familiar with the hazards described under 'Hazards and
safety precautions when putting the appliance into service' on page 31 and in the chapter 'For your
safety' in the user manual.
Eligibility of personnel for putting the appliance into service and removing it from service
Work performed on the appliance while putting the appliance into service is performed in special oper‐
ating circumstances (e.g. with safety covers removed) or includes activities that require personnel to
have relevant qualifications and appliance-specific knowledge that exceed the requirements for oper‐
ating personnel.
The following requirements must be met by personnel:
■
They are qualified employees of an authorized service company.
■
Personnel have relevant training as a service engineer.
■
Personnel have training specific to the appliance.
■
In particular, personnel must be able to assess whether the electrical, gas and water supplies and
the wastewater system have been connected to the appliance correctly.
Personal protective equipment
Wear the personal protective equipment specified in the section 'Personal protective equipment' on
page 43 of the 'For your safety' chapter for the relevant tasks.
On smelling gas
If you smell gas, take the following actions:
■
Cut off the gas supply immediately.
■
Ventilate the room carefully.
■
Do not operate any electrical equipment. Do not create a spark.
■
Evacuate the building.
■
Notify the gas utility company and if necessary the fire brigade using a phone located outside the
hazardous area.
7 Putting into service
110