background image

3  For your safety

Purpose of this chapter

This chapter provides you with all the information you need in order to use the combi oven safely with‐

out putting yourself or others at risk.
This is a particularly important chapter that you should read through carefully.

3.1  

 Basic safety code

Object of this safety code

This safety code aims to ensure that all persons who use the combi oven have a thorough knowledge

of the hazards and safety precautions, and that they follow the warning notices given in the user man‐

ual and on the combi oven. If you do not follow this safety code, you risk potentially fatal injury and

property damage.

Referring to the user manuals included in the customer documentation

Follow the instructions below:

Read in full the chapter 'For Your Safety' and the chapters that relate to your work.

Always keep to hand the manuals included in the customer documentation for reference.

Pass on the user manuals included in the customer documentation with the combi oven if it

changes ownership.

Ground rules for installation

Installation must comply with all national and regional laws and regulations and comply with the local

regulations of the relevant utility companies and local authorities and with other relevant requirements.
In Australia and New Zealand, these regulations also include (amongst other regulations):

AS 5601/AG 601

Working with the combi oven

Follow the instructions below:

Only those persons who satisfy the requirements stipulated in this user manual are permitted to

use the combi oven.

Only use the combi oven for the specified use. Never, under any circumstances, use the combi

oven for other purposes that may suggest themselves.

Take all the safety precautions specified in this user manual and on the combi oven. In particular,

use the prescribed personal protective equipment.

Only stand in the working positions specified.

Do not make any changes to the combi oven, e. g. removing parts or fitting unapproved parts. In

particular, you must not disable any safety devices.

3 For your safety

20

Содержание 4 10.10
































































































































































































Отзывы: