Continental Access SUPERTERM CIC1800, Инструкция по установке и обслуживанию, Страница: 76 / 92

SETTINGS
Superterm CIC1800 / CICP1400UL 76
MBAT Jumper
A lithium battery preserves data stored in memory
for 10 months in the event of a power failure or
loss of the system battery-backup (see Figure 48).
NOTES: The Superterm is shipped with the
MBAT jumper in the OUT mode to prevent
unnecessary battery drain.
DO NOT confuse the lithium battery with the
back-up battery (see page 5). The lithium battery
does not operate the Superterm in the event of a
power failure.
IN - Data Saved
The IN mode activates the lithium battery and
preserves Superterm data in the event of a
power failure or loss of the system battery-
backup.

Set the jumper to contact the center post (pin
2) and the left hand post (pin 1).
OUT - Data Lost
The OUT mode de-activates the lithium battery.
No Superterm programming or database
information will be saved.

Set the jumper to contact the center post (pin
2) and the right-hand post (pin 3).
MODE1 Jumper
The MODE 1 jumper is used to designate the
particular Superterm as an active REPEATER or a
passive MULTIDROP network member (see
Figure 48).
MULTIDROP Mode
Use this mode when the Superterm RS-422 Polling
port is operating in a MULTIDROP network.

Set the jumper to contact the center post (pin 2)
and the right-hand post (see pin 3).
REPEATER Mode
Use this mode when the Superterm RS-422 Polling
port is operating in a REPEATER network.

Set the jumper to contact the center post (pin 2)
and the left-hand post (pin 1).