Continental Access SUPERTERM CIC1800, Инструкция по установке и обслуживанию, Страница: 7 / 92

DESCRIPTION
Superterm CIC1800 / CICP1400UL 7
Figure 1 - Superterm Cabinet
DESCRIPTION
The Superterm is a fully programmable, self contained,
8-door access control system that offers users
flexibility, expandability, and simplicity. Operating as a
stand-alone unit or within a network, each Superterm
makes independent access control decisions.
The Superterm accepts Wiegand, Magnetic Stripe,
Proximity card readers and Keypads to control the
access functions for a maximum of eight individual sites
(entrances/exits). It supports a maximum of 24 alarm
devices including door contact sensors, door bypass
switches, or other related detection accessories.
Seventeen onboard Form C relays support door locking
mechanisms, door alarm shunts, request to-exit sensors
or handicapped access privileges.
The standard Superterm features a user-programmable,
onboard database that supports a maximum of 10,000
card holders. Expansion components enable the
Superterm to support up to 20,000 card holders (256K
version) or a maximum 200,000 card holders (2MB
version).
The standard Superterm uses an onboard 7AmpHour
(AH) backup battery to carry out full access control
functions for a period of four hours in the event of an
AC power supply loss. The expanded Superterm
features an onboard 12AH backup battery to operate
system devices for the same length of time (four hours).
In addition, an internal lithium battery protects the on-
board database and programmed operating instructions
from loss for a period of ten months. In the event of a
total failure of the AC power supply and the backup
battery, the Superterm would immediately be ready for
full operating capability once a source of operating
power is re-established.
For enhanced site access control requirements, multiple
Superterm units (a maximum of 32) may be networked
together or with other Continental Instruments products
including Smarterm, Miniterm, and Microterm. A
Superterm network may be configured to operate in a
repeater mode or in a multidrop mode, using the RS-422
communications protocols.
A single host computer may be used to manage and
program one Superterm or a fully developed network of
Superterms, saving equipment and installation costs,
database entry/deletion procedures, and monitoring
individual access usage.
Changes or upgrades to the Superterm operating
software are readily downloadable from the host
computer to either one specific Superterm or an entire
network of Superterms, eliminating the risky practice of
physically changing the ROM chips inside the unit(s).
4-Door Version
The Superterm is available as a 4-door version. The 4-
door version shares the same cabinet and main circuit
board as the 8-door version, but with fewer components.
The 4-door version of the Superterm supports four door
connectors, nine relays and 16 alarms. Installation
procedures for the 4-door version are the same as the 8-
door version.