Contec FX-DS110-APE Скачать руководство пользователя страница 46

Страница: 46 / 132

Installation Method

FX-DS110-APE

Attaching Using a Magnet

The magnet provided with the FX-DS110-APE makes it easy to
attach or remove the AP from metal surfaces such as steel partitions
or desks.

Notes!

- Do not place magnets near monitors, floppy disks, or other

sensitive objects.

- Moving the AP while it is mounted on a steel desk or similar

surface can cause paint scratching.

- Units cannot be stacked if attached by a magnet.

Attaching and removing magnets

To mount the unit using a magnet, push the magnet into the magnet
mounting hole in the direction of arrow 1 as shown in Figure 4.4. ,
then insert the entire magnet into the mounting hole.

Next, slide the magnet in the direction of arrow 2 to hold the unit in
place.

Magnet mounting holes

Magnet

Figure 4.4. Attaching Magnets

To remove, slide the magnet in the direction of arrow 1 in Figure
4.5. , then lift in the direction of arrow 2.

Figure 4.5. Removing Magnets

Содержание FX-DS110-APE





































































































































Результаты поиска

Содержание FX-DS110-APE

Отзывы:

Contec FX-DS110-APE, Руководство пользователя, Страница: 46 / 132

Результаты поиска

Содержание FX-DS110-APE

Отзывы: