manualshive.com logo in svg

Contec FX-DS110-APE, Руководство пользователя, Страница: 127 / 132

Поделиться
Скачать
Contec FX-DS110-APE Скачать руководство пользователя страница 127

Appendix

FX-DS110-APE

116

Glossary

SQE(Signal Quality Error) (Heartbeat)

This uses the same signal line as the collision signal for the purpose
of notifying the transmitting terminal that the packets sent from the
terminal are sent correctly over the cable.

PPP(Point to Point Protocol)

A protocol for communicating using TCP/IP over a serial line.

IEEE (Institute of Electrical Electronics Engineers)

"I-triple-E," involved in a wide range of fields from
communications and computer to medicine and biology, with
primary activities related to publishing articles and sponsoring
conferences, but also recommending and setting of standards.  The
organization sponsoring Committee 802, which is responsible for
LAN related matters.

IEEE 802.11/ IEEE 802.11b

The wireless LAN standard established by the IEEE.

MIB (Management Information Base)

The value of a MIB is determined by the Internet standard control
information structure.

SNMP (Simple Network Management Protocol)

A function necessary for network control, provides three functions:
Get (acquire), Set (modify), and Trap (notify event).  Conceived as
an easily installable control protocol that places as little load on the
network as possible.

SmartMedia

The formal name of a small-sized memory card previously called
the SSFDC (Solid State Floppy Disk Card) that was developed for
use as a very compact storage medium.  It is in wide use, being
also used in digital cameras and portable data terminals.  The
SmartMedia can easily be accessed from a PC using a commercially
available 3.5 inch floppy disk adaptor.

Содержание FX-DS110-APE





































































































































Отзывы:

Нет отзывов