Contec FX-DS110-APE, Руководство пользователя, Страница: 112 / 132

Troubleshooting
FX-DS110-APE
101
10. Troubleshooting
This chapter describes common problems that may occur with this
product and what to do about them. If any problems occur that are
not described here, check to confirm that the re-occur, then contact
the store where you purchased the product, or the CONTEC
information center.
When Communication Fails
Check hardware
- If connecting via the wired LAN, check that the LAN cable is
connected correctly.
- Check that the antenna is securely attached. Also check that
there are no obstructions in the way of the antenna.
Check software
- The FLEXLAN-DS110 series is designed to handle a variety of
operating formats, and requires software setting for each type of
operation. Check that the settings are appropriate for the type of
operation, and check the format in which communication is being
attempted. Also check DIP switch settings.
- The terminals that cannot communicate with each other may have
the same ESS ID. Two terminals with the same ESS ID cannot
communicate with each other.
- Check that the APL IP address and subnet settings have been
entered.
- Check whether the network mode is set correctly. Set the user
unit to ADHOC mode if using the AP in simple mode.
Otherwise, set the user unit mode to operate via an access point.
- Check whether communication is restricted by security functions.
- Check whether the data encryption setting is the same as that of
the recipient.