manualshive.com logo in svg

Contec FX-DS110-APE, Руководство пользователя, Страница: 22 / 132

Поделиться
Скачать
Contec FX-DS110-APE Скачать руководство пользователя страница 22

Component Locations and Setting

FX-DS110-APE

11

Connectors

Table 2.7.

Connectors

SmartMedia

Used to insert the SmartMedia (sold separately).  An eject button is provided.

COM

Used to connect a modem or terminal to update the settings or firmware.

UTP 10/100M

Used when connecting to 10BASE-T or 100BASE-TX.

Power supply
jack

DC5V power supply input jack.  When no AC power supply is available,
supply the power using this connector.
- Power supply specifications:  4.85 to 5.25VDC Max. 2.0A
- Power supply plug
  - Specification:  EIAJ RC-5320A  Voltage category 2
  - Polarity:  Outside terminal is negative (-) and center terminal is positive (+)
  - Plug diameter: 

 φ 

4.0mm (external diameter),

φ

 1.7mm (internal diameter)

Item

operation/function

Note!

Use either the AC power supply or DC power supply on the
FX-DS110-APE.
Using both power supplies at the same time may damage the AP.

Production Introduction to the FLEXLAN-DS110 Series

User unit (Option)

The user unit is equivalent to the LAN card for a wired LAN.  It is
plugged into the PC for use.
The FX-DS110-PCC is the PC Card (TYPE II) type.
The PC-CARD(PC)H, FX-PCI-EXT2, and FX-PCI-WOL are the
ISA bus adapter, PCI bus adapter, and PCI bus adapter for Wake-
on-LAN, respectively, available as options.

FX-DS110-PCC

WI RELESS LAN CARD

FX-PCI-EXT2

PC-CARD(PC)H

FX-PCI-WOL

Figure 2.3. User Unit

Содержание FX-DS110-APE





































































































































Отзывы:

Нет отзывов